
LiftingMotion’s bevel gear screw jacks use grinding-grade spiral bevel gear for high speed and high duty circle application. As a professional manufacturer, we can supply both standard and customized types to meet your application requirements.
- It has acme screw or ball screw version
- One, two, or three output shafts
- Screw translating, nut rotating, keyed configurations
- Right hand and left-hand screws are available
- Full Necessories: Protective tube, bellows, limit switch etc.
- Top plate, clevis end, thread end, plain end standard
- Can be used individually or in multiple arrangements
Bevel Gear Driven Screw Jack Spec & Application Videos
Bevel gear lifting jacks are more efficient and faster than worm driven screw jacks, so it’s the best choice for many applications. You can benefit from our wide experience with these applications. Please consult our technical sales, they will help you with calculations and suggestions for both standard and special applications.
| Model | LML100 | LML125 | LML140 | LML160 |
| Static load Capacity ( Kgf ) | 9766 | 12400 | 12691 | 20286 |
| Dynamic Load Capacity ( Kgf ) | 3844 | 4319 | 4803 | 5375 |
| Lifting Screw | Tr32*6 | Tr40*6 | Tr50*8 | Tr63*10 |
| Gear Ratio | 2.5 | 3 | 3 | 3 |
| Travel length per full turn of worm shaft ( mm ) | 2.4 | 2 | 2.67 | 2.67 |
| Efficiency ( % ) | 36 | 32 | 32 | 30 |
| Nut Material | Aluminum Bronze | Aluminum Bronze | Aluminum Bronze | Aluminum Bronze |
| Housing Material | Ductile iron | Ductile iron | Ductile iron | Ductile iron |
| Model | LMLB100 | LMLB125 | LMLB140 | LMLB160 |
| Static load Capacity ( Kgf ) | 9766 | 12400 | 12691 | 20286 |
| Dynamic Load Capacity ( Kgf ) | 3844 | 4319 | 4803 | 5375 |
| Ball Screw | 3210 | 4010 | 5010 | 6310 |
| Gear Ratio | 2.5 | 3 | 3 | 3 |
| Travel length per full turn of worm shaft ( mm ) | 4 | 3.33 | 3.33 | 3.33 |
| Efficiency ( % ) | 60 | 60 | 60 | 60 |
| Nut Material | Gcr15 | Gcr15 | Gcr15 | Gcr15 |
| Housing Material | Ductile iron | Ductile iron | Ductile iron | Ductile iron |
As a professional manufacturer, we can customize bevel gear jacks to meet your application requirements. Below is an example of customized type for AGV application.
Common Bevel Gear Jacks Layouts
Bevel gear jack can be made in three shafts, so it eliminates the need for miter gearboxes and makes it an ideal choice for multi-jack systems. Several common layouts are shown here.
For multiple jack layouts, motor power depends on the horsepower of per jack, number of jacks, miter gearbox’s efficiency, and layout efficiency. Layout efficiency : Two bevel jacks = 95%, Three bevel jacks = 90%, Four bevel jacks = 85%, Six to eight bevel jacks = 80%
- A wide range of reliable driven units, connecting shaft, gearbox, motor, etc to meet your exact function requirement.
- Whether complete system or single unit, whether driven by hand or by motor, you can get a complete solution from us.









